Customer Background
This is a medium-sized sand washing enterprise in Thailand, which mainly supplies mechanical sand and natural sand to surrounding construction sites. With the expansion of production capacity, the volume of slurry generated during the sand washing process has been increasing. The original sedimentation tank’s processing capacity is insufficient, resulting in high transportation costs for the slurry and significant environmental pressure. The customer hopes to install a filter press to achieve on-site sludge dewatering, reuse of clean water, and reduction of sludge cake transportation volume.
Customer requirements
Process the washed sand slurry. The requirement is for the sludge cake to have a low moisture content and be easy to load and transport for external delivery.
The filtrate should be clarified and can be reused in the sand washing process, reducing water consumption for new water supply.
The equipment should not occupy too much space. The operation and maintenance should be simple.
The budget should be controllable. It is hoped that the manufacturer can provide customized configurations and matching filter cloths.
Solution
After communication and cost analysis, we recommend the XMY40/630-30 (40m²) automatic hydraulic box-type filter press to our customers:
Implementation effect
After installation and commissioning, the equipment was put into operation. The customer’s feedback was:
- ✓ Significant decrease in sludge cake moisture content
- ✓ Clear filtrate that can be reused
- ✓ Simple operation and easy training
- ✓ Stable operation and low failure rate
- ✓ Compliance with environmental protection standards
Customer review
This 40m² filter press is perfectly suited for our processing capacity. The hydraulic pressing saves a lot of manpower. The double-ming effluent is clearly visible, and the filtered liquid can be reused, reducing water costs. The manufacturer’s configuration, tailored to our sand washing conditions, is very practical. The filter cloth water nozzles are all equipped, and it can be installed and used immediately.
Summary of the Case
For sand washing and sand making enterprises, the 40m² automatic hydraulic box-type filter press achieves a good balance between production capacity, floor space, and investment. The automatic hydraulic pressing ensures sealing and efficiency, while the manual lever plate controls costs and maintenance difficulty. The double-ming flow is convenient for quality monitoring. Combined with factory-customized configurations and complete accessories, it can quickly be implemented to form a closed-loop treatment of “sludge separation – clean water reuse – mud cake reduction”, suitable for small and medium-sized sand washing sites, sand and stone aggregate factories.
Post time: Nov-09-2026