Customer Background
The customer is a professional electroplating processing enterprise located in Southeast Asia. It mainly undertakes surface treatment services for hardware parts, electronic components, etc., and serves the local automotive parts and electronic manufacturing supply chain. The production workshop of this enterprise has multiple electroplating production lines. During the recycling process of the electrolyte solution, metal particles, anode slag, and suspended impurities will continuously accumulate, which affects the adhesion of the coating and the surface smoothness. Therefore, the stability of the electrolyte solution filtration process is required to be very high.
Customer Requirements
The customer previously used ordinary material filtration equipment, which had two major problems: Firstly, the filter material had insufficient corrosion resistance, resulting in a shorter service life in the electroplating solution environment and frequent replacements; Secondly, the filtration accuracy was unstable, with poor interception effect on fine particles, causing occasional defects on the surface of the plated parts. The customer hopes to purchase a bag-type filter that is corrosion-resistant, has stable filtration accuracy, is easy to maintain, and meets the following specific requirements:
- The material should have good corrosion resistance and be suitable for electroplating solution conditions.
- The filtration accuracy should reach 100 mesh, effectively intercepting fine particle impurities.
- The inlet and outlet dimensions should be DN65, matching the existing pipelines.
- The structure should be convenient for bag replacement and daily cleaning, reducing downtime.
- It supports factory customization and can adjust the inlet and outlet methods according to the on-site installation space.
Solution
Based on the customer’s working conditions and installation requirements, we recommended the 9# bag filter (model JYSF9#) for them and made targeted configurations:
Implementation Effect
- • Effective interception of particle impurities in the plating solution, a significant decrease in the defect rate of the plated parts, and an improvement in the surface finish of the plating layer.
- • The SUS304 material performs stably in the electroplating solution environment, the filter bag replacement cycle is longer than that of the previous equipment, and the maintenance cost is reduced.
- • The bag structure allows for quick bag replacement, reducing the single maintenance downtime and improving the continuity of the production line.
- • The internal polished surface is convenient for cleaning, reducing the daily maintenance workload.
- • The side-in and bottom-out structure matches the on-site pipeline well, running smoothly after installation, with normal pressure drop.
Customer Review
“The customer’s production supervisor stated that this 9# bag filter met the expected standards in terms of corrosion resistance and filtration stability. The customized inlet and outlet method eliminated the need for pipe modification during on-site installation, and the bag replacement maintenance was also simpler than before. This provided a reliable guarantee for the stable operation of the plating solution circulation system.”
Summary of the Case
This case demonstrates that for processes such as electroplating solution filtration that require both corrosion resistance and filtration accuracy, using a 9# bag filter made of SUS304 material, 100-mesh nylon filter bags, and a side-in, bottom-out structure, combined with factory customization based on on-site conditions, can effectively improve filtration stability, reduce maintenance costs, and support the production quality and operational efficiency of surface treatment enterprises.
Post time: Nov-19-2026
