Cast iron Filter Press high temperature resistance
✧ Product Features
The filter plates and frames are made of nodular cast iron, high temperature resistance and have a long service life.
Type of pressing plates method: Manual jack type, Manual oil cylinder pump type, and Automatic hydraulic type.
A、Filtration pressure: 0.6Mpa---1.0Mpa
B、Filtration temperature: 100℃-200℃/ High temperature.
C、Liquid discharge methods-Close flow: there are 2 close flow main pipes below the feed end of the filter press and if the liquid needs to be recovered or the liquid is volatile, smelly, flammable and explosive, close flow is used.
D-1、Selection of filter cloth material: The PH of the liquid determines the material of the filter cloth. PH1-5 is acidic polyester filter cloth, PH8-14 is alkaline polypropylene filter cloth.
D-2、Selection of filter cloth mesh: The fluid is separated, and the corresponding mesh number is selected for different solid particle sizes. Filter cloth mesh range 100-1000 mesh. Micron to mesh conversion (1UM = 15,000 mesh---in theory).
D-3、The cast iron frame filter press can also be used with filter paper for higher precision.
✧ Feeding Process
✧ Application Industries
Oil refining industry, gross oil filtration, white clay decolourisation filtration, beeswax filtration, industrial wax products filtration, waste oil regeneration filtration, and other fluid filtration with high viscosity filter cloths that are often cleaned.
✧ Filter Press Ordering Instructions
1. Refer to the filter press selection guide, filter press overview, specifications and models, select the model and supporting equipment according to the needs.
For example: Whether the filter cake is washed or not, whether the effluent is open or close, whether the rack is corrosion-resistant or not, the mode of operation, etc., must be specified in the contract.
2. According to the special needs of customers, our company can design and produce non-standard models or customized products.
3. The product pictures provided in this document are for reference only. In case of changes, we will not give any notice and the actual order will prevail.
Related products
-
Sludge sewage high pressure diaphragm filter pr...
✧ Product Features Diaphragm filter press matching equipment: Belt conveyor, liquid receiving flap, filter cloth water rinsing system, mud storage hopper, etc. A-1. Filtration pressure: 0.8Mpa; 1.0Mpa; 1.3Mpa; 1.6Mpa. (Optional) A-2. Diaphragm pressing pressure: 1.0Mpa;1.3Mpa;1.6Mpa. (Optional) B. Filtration temperature：45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature. C-1. Discharge method - open flow: Faucets need to be...
-
Automatic Large Filter Press For wastewater fil...
✧ Product Features A、Filtration pressure: 0.6Mpa----1.0Mpa----1.3Mpa-----1.6mpa (for choice) B、Filtration temperature：45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature. The raw material ratio of different temperature production filter plates is not the same, and the thickness of filter plates is not the same. C-1、Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate...
-
Efficient dewatering machine for sludge dewatering
According to the specific sludge capacity requirement, the width of machine can bechosen from 1000mm-3000mm(The choice of thickening belt and filter belt wouldvary/according to different types of sludge). Stainless steel of belt filter press is alsoavailable. It’s our pleasure to offer the most suitable and most economic effective proposal foryou according to your project! Main advantages 1.Integrated design, small footprint,easy to install;. 2. High processing c...
-
Chamber-type automatic hydraulic compression au...
Product Overview: The chamber filter press is an intermittent solid-liquid separation equipment that operates on the principles of high-pressure extrusion and filter cloth filtration. It is suitable for the dehydration treatment of high-viscosity and fine particle materials and is widely used in industries such as chemical engineering, metallurgy, food, and environmental protection. Core features: High-pressure dewatering – Utilizing a hydraulic or mechanical pressing system to provide ...
-
Customizable Heavy Duty Circular Filter Press f...
Key Features 1.High-strength circular filter plate design, with uniform force distribution and excellent pressure resistance performance 2.Fully automatic PLC control system, enabling one-click operation 3.Modular structure design, with simple and quick maintenance capabilities 4.Multiple safety protection devices ensure reliable operation 5.Low-noise design, in line with environmental protection requirements 6.Energy-saving and highly efficient, with low operating costs. Working Princ...
-
Environment Friendly Filter Press with Jack Com...
Key Features 1.High-efficiency Pressing:The jack provides stable and high-strength pressing force, ensuring the sealing of the filter plate and preventing slurry leakage. 2.Sturdy structure: Utilizing a high-quality steel frame, it is resistant to corrosion and has strong compressive strength, suitable for high-pressure filtration environments. 3.Flexible operation: The number of filter plates can be flexibly increased or decreased according to the processing volume, meeting different prod...