Small Manual Jack Filter Press
✧ Product Features
A、Filtration pressure≤0.6Mpa
B、Filtration temperature：45℃/ room temperature; 65℃-100/ high temperature; The raw material ratio of different temperature production filter plates is not the same.
C-1、Filtrate discharge method - open flow(seen flow): Filtrate valves (water taps) need to be installed ate the left and right sides of each filter plate, and a matching sink. Observe the filtrate visually and generally is used for liquids that are not recovered.
C-2、Filtrate discharge method - close flow (unseen flow)：Under the feed end of the filter press, there are two close flow outlet main pipes, which are connected with the filtrate tank. If the liquid needs to be recovered, or if the liquid is volatile, smelly, flammable and explosive, unseen flow is better.
D-1、Selection of filter cloth material: The pH of the liquid determines the material of the filter cloth. PH1-5 is acidic polyester filter cloth, PH8-14 is alkaline polypropylene filter cloth. The viscous liquid or solid is preferred to choose twill filter cloth, and the non-viscous liquid or solid is selected plain filter cloth.
D-2、Selection of filter cloth mesh: The fluid is separated, and the corresponding mesh number is selected for different solid particle sizes. Filter cloth mesh range 100-1000 mesh. Micron to mesh conversion (1UM = 15,000 mesh---in theory).
E、Rack surface treatment: PH value neutral or weak acid base; The surface of the filter press frame is sandblasted first, and then sprayed with primer and anti-corrosion paint. The PH value is strong acid or strong alkaline, the surface of the filter press frame is sandblasted, sprayed with primer, and the surface is wrapped with stainless steel or PP plate.
✧ Feeding Process
✧ Filter Press Model Guidance
✧ Application Industries
It is widely used in solid-liquid separation process in petroleum, chemical, dyestuff, metallurgy, pharmacy, food, coal washing, inorganic salt, alcohol, chemical, metallurgy, pharmacy, light industry, coal, food, textile, environmental protection, energy and other industries.
✧ Filter Press Ordering Instructions
1. Refer to the filter press selection guide, filter press overview, specifications and models, select the model and supporting equipment according to the needs. We have professional technical team to help select the suitable model, welcome to leave your contact information to inquiry.
2. According to the special needs of customers, our company can design and produce non-standard models or customized products. For example: Whether the filter cake is washed or not, whether the filtrate is open or close, whether the rack is corrosion-resistant or not, the mode of operation, etc.
3. The product pictures provided in this document are for reference only. In case of changes, we will not give any notice and the actual order will prevail.
Filter press operation specification
1. According to the process requirements to make pipeline connection, and do water inlet test, detect the air tightness of the pipeline;
2. For the connection of the input power supply (3 phase + neutral), it is best to use a ground wire for the electric control cabinet;
3. Connection between control cabinet and surrounding equipment. Some wires has been connected. The output line terminals of the control cabinet are labeled. Refer to the circuit diagram to check the wiring and connect it. If there is any looseness in the fixed terminal, compress again;
4. Fill the hydraulic station with 46 # hydraulic oil, the hydraulic oil should be seen in the tank observation window. If the filter press operates continuously for 240 hours, replace or filter the hydraulic oil;
5. Installation of cylinder pressure gauge. Use a wrench to avoid manual rotation during installation. Use an O-ring at the connection between the pressure gauge and the oil cylinder;
6. The first time the oil cylinder runs, the motor of the hydraulic station should be rotated clockwise (indicated on the motor). When the oil cylinder is pushed forward, the pressure gauge base should discharge air, and the oil cylinder should be repeatedly pushed forward and backward (the upper limit pressure of the pressure gauge is 10Mpa) and air should be discharged simultaneously;
7. The filter press runs for the first time, select the manual state of control cabinet to run different functions respectively; After the functions are normal, you can select the automatic state;
8. Installation of filter cloth. During the trial operation of the filter press, the filter plate should be equipped with filter cloth in advance. Install the filter cloth on the filter plate to ensure that the filter cloth is flat and there are no creases or overlaps. Manually push the filter plate to ensure that the filter cloth is flat.
9. During the operation of the filter press, if an accident occurs, the operator presses the emergency stop button or pulls the emergency rope;
Related products
-
Cost-Effective 870 Filter Press, Efficient Hydr...
Product features 1. Value guardian: zero leakage, guarantee production safety and full recovery of materials Absolutely closed system: from feeding, pressure filtration to washing, drying, unloading, the whole process is carried out in a completely closed environment, completely eliminate the leakage and volatilization of toxic, harmful, flammable, explosive or high-value materials. Safety and environmental compliance: Effective isolation of operators and hazardous materials, no odor esca...
-
304 Stainless Steel Manual Hydraulic Filter Pre...
Product features 1.Excellent material quality The main components (filter plate, compression plate, hydraulic cylinder, etc.) are made of 304 or 316 stainless steel, which is corrosion-resistant and rust-proof, and complies with food-grade hygiene standards. 2. Manual hydraulic pressing Driven by a manual hydraulic pump, the operation is simple, the pressure is stable, and it ensures the sealing of the filter plate, preventing material leakage. 3. Box-type filter plate design The surface...
-
Manual Cylinder Filter Press
✧ Product Features A、Filtration pressure＜0.5Mpa B、Filtration temperature：45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature. The raw material ratio of different temperature production filter plates is not the same, and the thickness of filter plates is not the same. C-1、Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate, and a matching sink. Open flow is used...
-
Factory Supply Manual Hydraulic Filter Press fo...
Product features ✅ Manual hydraulic drive: Utilizes a manual oil pump to provide pressure, without the need for electricity. Suitable for environments without power supply or for mobile operations. ✅ High-strength structure: The frame is welded with high-quality steel, resistant to corrosion and deformation, ensuring long-term stable operation. ✅ High-efficiency filtration: Uses PP (polypropylene) or reinforced polypropylene filter plates, resistant to acids and alkalis, and high-temperature ...
-
Chamber-type automatic hydraulic compression au...
Product Overview: The chamber filter press is an intermittent solid-liquid separation equipment that operates on the principles of high-pressure extrusion and filter cloth filtration. It is suitable for the dehydration treatment of high-viscosity and fine particle materials and is widely used in industries such as chemical engineering, metallurgy, food, and environmental protection. Core features: High-pressure dewatering – Utilizing a hydraulic or mechanical pressing system to provide ...
-
Manual Hydraulic Cylinder Chamber Filter Press ...
Product Features ✅ Manual hydraulic drive: Utilizes a manual oil pump to provide pressure, eliminating the need for electricity. Suitable for environments without power supply or for mobile operations. ✅ High-strength structure: The frame is welded with high-quality steel, resistant to corrosion and deformation, ensuring long-term stable operation. ✅ High-efficiency filtration: Uses PP (polypropylene) or reinforced polypropylene filter plates, resistant to acids and alkalis, and high-temperat...