Hydraulic plate and frame filter press for Industrial filtration
✧ Product Features
A、Filtration pressure: 0.6Mpa
B、Filtration temperature：45℃/ room temperature; 65-100℃/ high temperature.
C、Liquid discharge methods：
Open flow Each filter plate is fitted with a faucet and matching catch basin. The liquid that is not recovered adopts open flow;
Close flow: There are 2 close flow main pipes below the feed end of the filter press and if the liquid needs to be recovered or the liquid is volatile, smelly, flammable and explosive, close flow is used.
D-1、Selection of filter cloth material: The PH of the liquid determines the material of the filter cloth. PH1-5 is acidic polyester filter cloth, PH8-14 is alkaline polypropylene filter cloth.
D-2、Selection of filter cloth mesh: The fluid is separated, and the corresponding mesh number is selected for different solid particle sizes. Filter cloth mesh range 100-1000 mesh. Micron to mesh conversion (1UM = 15,000 mesh---in theory).
E、Pressing method: jack, manual cylinder, automatic cylinder pressing.
F、Filter cake washing: If the filter cake is strongly acidic or alkaline, and necessary to recover solids.
Automatic hydraulic compress filter plate, manual discharge cake.
The plate and frames are made of reinforced polypropylene, acid and alkali resistance.
PP plate and frame filter presses are used for materials with high viscosity, and the filter cloth is often cleaned or replaced.
If need, It can be used with filter paper for higher filtration precision.
✧ Feeding Process
✧ Application Industries
Gold fine powder, oil and grease decolouration, white clay filtration, gross oil filtration, sodium silicate filtration, sugar products filtration, and other viscosity of the filter cloth is often cleaned fluid filtration.
✧ Filter Press Ordering Instructions
1. Refer to the filter press selection guide, filter press overview, specifications and models, select the model and supporting equipment according to the needs.
For example: Whether the filter cake is washed or not, whether the effluent is open or close, whether the rack is corrosion-resistant or not, the mode of operation, etc., must be specified in the contract.
2. According to the special needs of customers, our company can design and produce non-standard models or customized products.
3. The product pictures provided in this document are for reference only. In case of changes, we will not give any notice and the actual order will prevail.
Related products
-
Hours Continuous Filtration Municipal Sewage Tr...
✧ Product Features 1. Higher Filtration rates with minimum moisture content. 2. Lower operating and maintenance costs due to efficient & sturdy design. 3. Low friction advanced air box mother belt support system, Variants can be offered with slide rails or roller decks support system. 4. Controlled belt aligning systems results in maintenance free running for a long time. 5. Multi stage washing. 6. Longer life of mother belt due to less fric...
-
Chamber-type automatic hydraulic compression au...
Product Overview: The chamber filter press is an intermittent solid-liquid separation equipment that operates on the principles of high-pressure extrusion and filter cloth filtration. It is suitable for the dehydration treatment of high-viscosity and fine particle materials and is widely used in industries such as chemical engineering, metallurgy, food, and environmental protection. Core features: High-pressure dewatering – Utilizing a hydraulic or mechanical pressing system to provide ...
-
Small Manual Jack Filter Press
✧ Product Features A、Filtration pressure≤0.6Mpa B、Filtration temperature：45℃/ room temperature; 65℃-100/ high temperature; The raw material ratio of different temperature production filter plates is not the same. C-1、Filtrate discharge method - open flow(seen flow): Filtrate valves (water taps) need to be installed ate the left and right sides of each filter plate, and a matching sink. Observe the filtrate visually and generally is used...
-
870 Filter Press – Diaphragm Squeeze & Aut...
Core Function and Advantages 1. Diaphragm Pressing Technology The filter cake is subjected to secondary pressing using an elastic diaphragm (made of rubber or PP material), which significantly reduces the moisture content of the filter cake (reducing it by 10% to 30% compared to ordinary filter presses). Suitable for high-demand scenarios, such as mining, chemical industry, sewage treatment, etc. 2. Water flushing system High-pressure water cleaning device: Automatically cleans the filter...
-
Manual Hydraulic Cylinder Chamber Filter Press ...
Product Features ✅ Manual hydraulic drive: Utilizes a manual oil pump to provide pressure, eliminating the need for electricity. Suitable for environments without power supply or for mobile operations. ✅ High-strength structure: The frame is welded with high-quality steel, resistant to corrosion and deformation, ensuring long-term stable operation. ✅ High-efficiency filtration: Uses PP (polypropylene) or reinforced polypropylene filter plates, resistant to acids and alkalis, and high-temperat...
-
Recessed Filter Plate (CGR Filter Plate)
✧ Product Description The embedded filter plate (sealed filter plate) adopts a embedded structure, the filter cloth is embedded with sealing rubber strips to eliminate leakage caused by capillary phenomenon. The sealing strips are embedded around the filter cloth, which has good sealing performance. The edges of the filter cloth are fully embedded in the sealing groove on the inner side of th...