Customizable High Capacity 630 Chamber Filter Press with Large Filtering Area
Main Structure and Components
1. Rack Section Including the front plate, rear plate and main beam, The rack is wrapped with stainless steel, which is corrosion-resistant.
2. Filter plate and filter cloth The filter plate can be made of polypropylene (PP), rubber or stainless steel, which has strong corrosion resistance; the filter cloth is selected according to the characteristics of the materials (such as polyester, nylon).
3. Hydraulic System Provide high-pressure power, automatically compress the filter plate (the pressure can usually reach 25-30 MPa), with excellent sealing performance.
4. Automatic Plate Pulling Device Through motor or hydraulic drive, the filter plates are precisely controlled to be pulled apart one by one, enabling rapid discharging.
5. Control System PLC programming control, supporting touchscreen operation, allowing setting of parameters such as pressure, time, and cycle count.
Core Advantages
1. High-efficiency Automation: No manual intervention throughout the process. The processing capacity is 30% – 50% higher than that of traditional filter presses.
2. Energy conservation and environmental protection: The moisture content of the filter cake is low (in some industries, it can be reduced to below 15%), thereby reducing the cost of subsequent drying; the filtrate is clear and can be reused.
3. High durability: Key components are designed with anti-corrosion features, ensuring long service life and easy maintenance.
4. Flexible Adaptation: Supports various designs such as direct flow, indirect flow, washable, and non-washable, meeting different process requirements.
Equipment schematic diagram
Programmed automatic pulling plate chamber filter presses is not manual operation, but a key start or remote control and achieve full automation. Junyi’s chamber filter presses are equipped with an intelligent control system with an LCD display of the operating process and a fault warning function. At the same time, the equipment adopts Siemens PLC automatic control and Schneider components to ensure the overall operation of the equipment. In addition, the equipment is equipped with safety devices to ensure safe operation.
Application fields
Chemical Industry: Pigments, dyes, catalyst recovery.
Mining: Tailings dewatering, extraction of metal concentrates.
Environmental protection: Municipal sludge and industrial wastewater treatment.
Food: Juice clarified, starch dehydrated.
Related products
-
Automatic Discharge Chamber Filter Press Machin...
Main Structure and Components 1. Rack Section Including the front plate, rear plate and main beam, they are made of high-strength steel to ensure the stability of the equipment. 2. Filter plate and filter cloth The filter plate can be made of polypropylene (PP), rubber or stainless steel, which has strong corrosion resistance; the filter cloth is selected according to the characteristics of the materials (such as polyester, nylon). 3. Hydraulic System Provide high-pressure power, automatica...
-
Automatic Filter Press Supplier
✧ Product Features A、Filtration pressure: 0.6Mpa----1.0Mpa----1.3Mpa-----1.6mpa (for choice) B、Filtration temperature：45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature. The raw material ratio of different temperature production filter plates is not the same, and the thickness of filter plates is not the same. C-1、Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate...
-
Manual Small Closed Filter Press for Precious M...
Product Features 1.Sealed chamber structure: Prevents material splashing, ensuring a safer and cleaner operating environment. 2.Manual jack compression: No power supply required, suitable for small-batch, intermittent production. Simple and reliable operation. 3.Closed discharge design: Prevents material from contacting the external environment, reducing volatilization and contamination. 4.High-quality filter plates: PP filter plates combined with flu...
-
Automatic pull plate double oil cylinder large ...
Automatic hydraulic filter press is a batch of pressure filtration equipment, mainly used for solid-liquid separation of various suspensions. It has the advantages of good separation effect and convenient use, and is widely used in petroleum, chemical industry, dyestuff, metallurgy, pharmacy, food, paper making, coal washing and sewage treatment . Automatic hydraulic filter press is mainly composed of the following parts: rack part : includes a thrust plate and a compression plate to...
-
New Design Filter Press for Mineral Processing,...
Core positioning XMY50/870 is a hydraulic box-type filter press specifically developed for medium-sized, stable and continuous production. Its design focuses on key process indicators – reliable sealing, uniform filter cake formation and intuitive process control. It is an ideal choice for handling high-value or difficult-to-process materials such as pigments, minerals, and chemical intermediates. Engineering core Precise hydraulic system: The precise matching of 20MPa clamping force a...
-
New products High-Pressure 630 Dark Flow Filter...
Key Features 1.High-strength box-type structure design, with excellent pressure resistance performance 2.Fully automatic PLC control system, enabling one-click operation 3.Modular design, with simple and efficient maintenance. 4.Multiple safety protection devices ensure reliable operation 5.Low energy consumption design, with economical operating costs 6.Selection of corrosion-resistant materials, suitable for harsh working conditions Basic workflow The box-type filter press achieves sol...