Recessed Filter Plate (CGR Filter Plate)
✧ Product Description
The embedded filter plate (sealed filter plate) adopts a embedded structure, the filter cloth is embedded with sealing rubber strips to eliminate leakage caused by capillary phenomenon. The sealing strips are embedded around the filter cloth, which has good sealing performance.
The edges of the filter cloth are fully embedded in the sealing groove on the inner side of the filter plate and fixed.
Suitable for volatile products or concentrated collection of filtrate, effectively avoiding environmental pollution and maximizing the collection of filtrate.
The sealing strip is made of various materials such as ordinary rubber, EPDM, and fluororubber, which can meet the needs of different users.
✧ Parameter list
| Model(mm) | PP Camber | Diaphragm | Closed | Stainless steel | Cast Iron | PP Frame and Plate | Circle |
| 250×250 | √ | ||||||
| 380×380 | √ | √ | √ | √ | |||
| 500×500 | √ | √ | √ | √ | √ | ||
| 630×630 | √ | √ | √ | √ | √ | √ | √ |
| 700×700 | √ | √ | √ | √ | √ | √ | |
| 800×800 | √ | √ | √ | √ | √ | √ | √ |
| 870×870 | √ | √ | √ | √ | √ | √ | |
| 900×900 | √ | √ | √ | √ | √ | √ | |
| 1000×1000 | √ | √ | √ | √ | √ | √ | √ |
| 1250×1250 | √ | √ | √ | √ | √ | √ | |
| 1500×1500 | √ | √ | √ | √ | |||
| 2000×2000 | √ | √ | √ | ||||
| Temperature | 0-100℃ | 0-100℃ | 0-100℃ | 0-200℃ | 0-200℃ | 0-80℃ | 0-100℃ |
| Pressure | 0.6-1.6Mpa | 0-1.6Mpa | 0-1.6Mpa | 0-1.6Mpa | 0-1.0Mpa | 0-0.6Mpa | 0-2.5Mpa |
| Filter Plate Parameter List | |||||||
| Model(mm) | PP Camber | Diaphragm | Closed | Stainless steel | Cast Iron | PP Frame and Plate | Circle |
| 250×250 | √ | ||||||
| 380×380 | √ | √ | √ | √ | |||
| 500×500 | √ | √ |
√ | √ | √ | ||
| 630×630 | √ | √ |
√ | √ | √ | √ | √ |
| 700×700 | √ | √ | √ | √ | √ | √ | |
| 800×800 | √ | √ | √ | √ | √ | √ | √ |
| 870×870 | √ | √ | √ | √ | √ | √ | |
| 900×900 | √ | √ | √ |
√ | √ | √ | |
| 1000×1000 | √ | √ | √ | √ | √ |
√ | √ |
| 1250×1250 | √ | √ | √ | √ | √ | √ | |
| 1500×1500 | √ | √ | √ | √ | |||
| 2000×2000 | √ | √ | √ | ||||
| Temperature | 0-100℃ | 0-100℃ | 0-100℃ | 0-200℃ | 0-200℃ | 0-80℃ | 0-100℃ |
| Pressure | 0.6-1.6Mpa | 0-1.6Mpa | 0-1.6Mpa | 0-1.6Mpa | 0-1.0Mpa | 0-0.6Mpa | 0-2.5Mpa |
Related products
-
Cost-Effective 380 Model Manual Jack Filter Pre...
Product features Mechanical jack compression: Utilizing a high-strength manual jack to provide the compression force. The pressure is stable and reliable, and does not require power drive. It is suitable for use in environments without power supply. Single-movement flow filtration structure: The filtrate flows out from the same side of each filter plate, which is convenient for observing the filtration process and collecting the filtrate. This structure is particularly suitable for proces...
-
Sludge Dewatering Machine Belt Press Filter
✧ Product Features * Higher Filtration rates with minimum moisture content. * Lower operating and maintenance costs due to efficient & sturdy design. * Low friction advanced air box mother belt support system, Variants can be offered with slide rails or roller decks support system. * Controlled belt aligning systems results in maintenance free running for a long time. * Multi stage washing. * Longer life of mother belt due to less friction o...
-
Small Hydraulic Filter Press 450 630 Filtration...
✧ Product Features A、Filtration pressure≤0.6Mpa B、Filtration temperature：45℃/ room temperature; 65℃-100/ high temperature; The raw material ratio of different temperature production filter plates is not the same. C-1、Filtrate discharge method - open flow(seen flow): Filtrate valves (water taps) need to be installed ate the left and right sides of each filter plate, and a matching sink. Observe the filtrate visually and generally is used...
-
Efficient dewatering machine for sludge dewatering
According to the specific sludge capacity requirement, the width of machine can bechosen from 1000mm-3000mm(The choice of thickening belt and filter belt wouldvary/according to different types of sludge). Stainless steel of belt filter press is alsoavailable. It’s our pleasure to offer the most suitable and most economic effective proposal foryou according to your project! Main advantages 1.Integrated design, small footprint,easy to install;. 2. High processing c...
-
Factory Supply Manual Hydraulic Filter Press fo...
Product features ✅ Manual hydraulic drive: Utilizes a manual oil pump to provide pressure, without the need for electricity. Suitable for environments without power supply or for mobile operations. ✅ High-strength structure: The frame is welded with high-quality steel, resistant to corrosion and deformation, ensuring long-term stable operation. ✅ High-efficiency filtration: Uses PP (polypropylene) or reinforced polypropylene filter plates, resistant to acids and alkalis, and high-temperature ...
-
Membrane Filter Plate
✧ Product Features The diaphragm filter plate is composed of two diaphragms and a core plate combined by high-temperature heat sealing. An extrusion chamber (hollow) is formed between the membrane and the core plate. When external media (such as water or compressed air) is introduced into the chamber between the core plate and the membrane, the membrane will be bulged and compress the filter cake in the chamber, achieving secondary extrusion dehydration of the filter...