Cotton Filter Cloth and Non-woven Fabric
✧ Cotton Filter Cloht
Material
Cotton 21 yarns, 10 yarns, 16 yarns; high temperature resistant, non-toxic and odorless
Use
Artificial leather products, sugar factory, rubber, oil extraction, paint, gas, refrigeration, automobile, rain cloth and other industries;
Norm
3×4、4×4 、5×5 5×6 、6×6 、7×7、8×8、9×9 、1O×10 、1O×11、11×11、12×12、17×17
✧ Non-woven Fabric
Product introduction
Needle-punched non-woven fabric belongs to a kind of non-woven fabric, with polyester, polypropylene raw material manufacturing, after many times of needle punching to be appropriate hot-rolled treatment and become. According to the different process, with different materials, made of hundreds of goods.
Specification
Weight: (100-1000)g/㎡, Thickness: ≥5mm, Width: ≤210cm.
Application
Coal washing, ceramic mud, tailings dry drainage, iron and steel wastewater, stone wastewater.
Related products
-
Directly Supplied by the Factory Automatic Hydr...
Key Features 1.High-strength box-type structure design, with excellent pressure resistance performance 2.Fully automatic PLC control system, enabling one-click operation 3.Modular design, with simple and efficient maintenance. 4.Multiple safety protection devices ensure reliable operation 5.Low energy consumption design, with economical operating costs 6.Selection of corrosion-resistant materials, suitable for harsh working conditions Basic workflow The box-type filter press achieves so...
-
PP Filter Plate and filter frame
The filter plate and filter frame are arranged in order to form filter chamber, easy to install filter cloth. Filter Plate Parameter List Model(mm) PP Camber Diaphragm Closed Stainless steel Cast Iron PP Frame and Plate Circle 250×250 √ 380×380 √ √ √ √ 500×500 √ √ √ √ √ 630×630 √ √ √ √ √ √ √ 700×700 √ √ √ √ √ √ ...
-
Cost-Effective 380 Model Manual Jack Filter Pre...
Product features Mechanical jack compression: Utilizing a high-strength manual jack to provide the compression force. The pressure is stable and reliable, and does not require power drive. It is suitable for use in environments without power supply. Single-movement flow filtration structure: The filtrate flows out from the same side of each filter plate, which is convenient for observing the filtration process and collecting the filtrate. This structure is particularly suitable for proces...
-
New function Fully automated belt filter press ...
Structural characteristics The belt filter press has compact structure, novel style, convenient operation and management, large processing capacity, low moisture content of filter cake and good effect. Compared with the same type of equipment, it has the following characteristics: 1. The first gravity dewatering section is inclined, which makes the sludge up to 1700mm from the ground, increases the height of sludge in the gravity dewatering section, and improves the gravity dewatering capa...
-
Automatic Large Filter Press For wastewater fil...
✧ Product Features A、Filtration pressure: 0.6Mpa----1.0Mpa----1.3Mpa-----1.6mpa (for choice) B、Filtration temperature：45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature. The raw material ratio of different temperature production filter plates is not the same, and the thickness of filter plates is not the same. C-1、Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate...
-
Industrial filtration equipment High Efficiency...
Product features and advantages 1. Low cost: The purchase cost and maintenance cost of the equipment are both low. 2. Simple operation: No need for complex electrical or hydraulic knowledge. Training is sufficient for immediate on-the-job use. 3. Safe and reliable: There is no risk of hydraulic oil leakage. Manual operation is safer in certain situations. 4. Easy maintenance: The structure is simple, with few failure points, and the daily maintenance workload is small. 5. Visual Observation...