High quality Easy to maintain Industrial Chamber Filter Press for Wastewater Treatment
Key Features
1.High-strength box-type structure design, with excellent pressure resistance performance
2.Fully automatic PLC control system, enabling one-click operation
3.Modular design, with simple and efficient maintenance.
4.Multiple safety protection devices ensure reliable operation
5.Low energy consumption design, with economical operating costs
6.Selection of corrosion-resistant materials, suitable for harsh working conditions
Core advantages
1. High-efficiency filtration performance
High-pressure rapid filtration
Low moisture content filter cake
Shorten the production cycle
2. Outstanding durability and quality
High-strength structural design
High-quality anti-corrosion material
Extremely long service life
3. Energy-saving and Environmental-friendly
Design Significantly reduce energy consumption
Sealing structure
Low-noise operation
4. Flexible configuration plan
Multiple specifications are available.
Customized design
Adapt to special needs
5. Professional Service
Assurance Round-the-clock technical support
Global Service System
Long-term quality assurance
Basic workflow
The box-type filter press achieves solid-liquid separation through pressure drive. Its working process can be divided into four main stages:
1.Compression stage: The hydraulic system drives the compression plate, causing the filter plate group to tightly close and form a sealed filtration chamber.
2.Feed filtration: The slurry is injected into the filter chamber through the feed pump, and solid-liquid separation is achieved under the pressure effect.
3.Pressurized dehydration: Further reducing the moisture content of the filter cake through membrane squeezing or high-pressure gas.
4.Discharge cleaning: Remove the filter cake by opening the filter plate, and clean the filter cloth if necessary.
How to choose the right model?
- What is the liquid that needs filtering?
2. What is the flow rate?
3. Temperature/PH value?
4. What are the main solid impurities that need to be filtered from the liquid? What is their content?
We can make recommendations based on this information.
Related products
-
Cost-Effective Chamber Filter Press, 700 Hydrau...
Product Features 1. Intelligent hydraulic system: The hydraulic cylinders provide stable and powerful clamping force, ensuring uniform distribution of filtration pressure. 2. Intelligent Control: The PLC control cabinet achieves full-process automatic control. Pressure sensors monitor and feedback the system pressure in real time. 3. Dual operation mode: Combining automatic feeding with manual plate pulling, this mode takes into account both efficiency and operational flexibility. 4. Double-...
-
Automatic recessed Filter Press anti leakage fi...
✧ Product Description It is a new type of the filter press with the recessed filter plate and strengthen rack. There are two kinds of such filter press: PP Plate Recessed Filter Press and Membrane Plate Recessed Filter Press. After the filter plate has been pressed,there will be a closed state among the chambers to avoid the liquid leakage and odors volatilization during the filtration and cake discharging. It is widely used in the pesticide, chemical, the s...
-
Chamber Filter Press 500x500mm Dual Dark Flow F...
Product Features 1.Box-type 500 model structure, with dual counter-flow design, enhancing filtration efficiency and stability. 2.PP material filter plate, corrosion-resistant, suitable for acidic and alkaline environments with pH ranging from 3 to 9. 3.Equipped with an SS304 material electric diaphragm pump, it is resistant to wear and corrosion, and the flow rate can reach 3.5 m³/h. 4.The jack is tightened and the manual lever operation ...
-
Automatic Discharge Chamber Filter Press Machin...
Main Structure and Components 1. Rack Section Including the front plate, rear plate and main beam, they are made of high-strength steel to ensure the stability of the equipment. 2. Filter plate and filter cloth The filter plate can be made of polypropylene (PP), rubber or stainless steel, which has strong corrosion resistance; the filter cloth is selected according to the characteristics of the materials (such as polyester, nylon). 3. Hydraulic System Provide high-pressure power, automatica...
-
Automatic Large Filter Press For wastewater fil...
✧ Product Features A、Filtration pressure: 0.6Mpa----1.0Mpa----1.3Mpa-----1.6mpa (for choice) B、Filtration temperature：45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature. The raw material ratio of different temperature production filter plates is not the same, and the thickness of filter plates is not the same. C-1、Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate...
-
630 Sealed Automatic Pressurization Filter Mach...
Main structural components Frame part: High-strength steel structure, supporting the filter plates and the hydraulic system. Filter plate and filter cloth: The material of the filter plate can be polypropylene (PP), rubber, stainless steel, etc.; the filter cloth is selected according to the characteristics of the material. Hydraulic system: Provides high-pressure power (with a pressure range typically between 0.5 and 2.0 MPa), ensuring the compression of the filter plates and maintaining t...