• products

Automatic stainless steel self cleaning filter

Brief Introduction:

In the whole process, the filtrate does not stop flowing, realizing continuous and automatic production. 

Automatic self-cleaning filter is mainly composed of a drive part, an electric control cabinet, a control pipeline (including a differential pressure switch), an high strength filter screen, a cleaning component (brush type or scraper type), connection flange, etc. 


Product Detail

Drawings And Parameters

Video

1. The control system of the equipment is responsive and accurate. It can flexibly adjust the pressure difference and time setting value according to different water sources and filtration accuracy.

2. The filter element adopts stainless steel wedge wire mesh, high strength, high hardness, wear and corrosion resistance, easy to clean. Easily and thoroughly remove impurities trapped by the filter screen, cleaning without dead corners.

3. We use pneumatic valve, open and close automatically and the draining time can be set.

4. The structure design of the filter equipment is compact and reasonable, and the floor area is small, and the installation and movement are flexible and convenient.

5. The electric system adopts integrated control mode, which can realize remote control too.

6. The modified equipment can ensure filtration efficiency and long service life.

自清洗过滤器2
自清洗过滤器 抛光4
自清洗过滤器3
自清洗过滤器1
自清洗过滤器27
Y自清洗2

Application industries

Self-cleaning filter is mainly suitable for fine chemical industry, water treatment system, paper making, automotive industry, petrochemical industry, machining, coating and other industries.


  • Previous:
  • Next:

  • 这侧进那侧出自清洗图纸 同侧进出自清洗图纸底侧进侧出自清洗图纸 Y型自清洗图纸 卧式自清洗图纸自清洗参数表

  • Write your message here and send it to us

    Related products

    • Industrial-grade high-efficiency automatic self-cleaning filter with long life

      Industrial-grade high-efficiency automatic self...

      The cleaning component is a rotating shaft which there are suction nozzles on it instead of brush/scraper. The self-cleaning process is completed by the sucking scanner and the blow-down valve, which move spirally along the inner surface of the filter screen. The opening of the blow-down valve generates a high backwash flow rate at the front end of the suction nozzle of the sucking scanner and forms a vacuum. The solid particles attached to the inner wall of the filter screen is sucked out an...

    • Pneumatic Self Cleaning Filter SS316L Housing Sandblasted Electric Ball Valve Drain

      Pneumatic Self Cleaning Filter SS316L Housing S...

      Product Features   1.Pneumatic scraping cleaning mechanism: Utilizing SS304 stainless steel cylinders, the scraper moves up and down closely against the surface of the wedge-shaped screen, effectively removing adhered particles and impurities. The cleaning action is powerful and reliable, and the filter screen does not need to be disassembled.  2. Thickened corrosion-resistant housing: The diameter of the filter body is DN200. Both the housing and the wedge-shaped screen ...

    • JYSFC-300 Self-Cleaning Water Filter 350μm SS304 High Pressure 15.5bar

      JYSFC-300 Self-Cleaning Water Filter 350μm SS30...

      Product Features             1.High-efficiency filtration: The filtration accuracy reaches 350μm, suitable for removing particulate matter in hot condensed water.  2.Fully automatic cleaning: Supports pressure difference activation or manual control. The cleaning time is ≤ 1 minute, and the process does not require machine shutdown.  3.High-temperature and high-pressure resistant design: Working temperature 111℃, design temperature 136℃, working pre...

    • Custom SS304 Auto Self Cleaning Strainer 1.0MPa 100C Industrial Water Treatment Factory

      Custom SS304 Auto Self Cleaning Strainer 1.0MPa...

      Product Features 01 All stainless steel structure 02 High precision filtration 03 Dual monitoring trigger 04 Top-in-bottom-out structure 05 Fluorine rubber sealing 06 Bottom discharge design Product advantages 1. Strong continuous operation capability The self-cleaning process does not require stopping or disassembling the equipment. The filtration and cleaning can be carried out simultaneously. 2. Low maintenance cost Automatic monitoring and automatic cleaning...

    • Self Cleaning Strainer 316L 5mm Wedge Wire Single Cylinder Custom OEM

      Self Cleaning Strainer 316L 5mm Wedge Wire Sing...

      Product features 1.Customized complete machine: Model JYSEC-200-316L. The dwg drawings are confirmed before production according to the customer’s requirements and then manufactured. 2.316L stainless steel material: Both the body and the wedge-shaped net are made of 316L stainless steel, which is corrosion-resistant. 3.Single cylinder drive for cleaning: The cleaning method is the one specified by the customer, with an air cylinder diameter of 219 mm. 4.Wedge-shaped net with 5 mm ac...

    • Custom Self Cleaning Filter SS304 10 Micron Automatic Brush Filter for Cooling Tower

      Custom Self Cleaning Filter SS304 10 Micron Aut...

      Product Features ☉ 1. Self-cleaning structure of nylon brush: The nylon brush is used to scrape and clean the surface of the filter element. The cleaning process does not damage the filter screen, and the filter element can be reused for a long time. ☉ 2. Wedge-shaped filter element: The SS304 wedge-shaped mesh filter element has the characteristics of large flow area, low pressure loss, and strong anti-blocking ability. With a 10-micron precision, it can effectively intercept fine par...