Round Filter Press Manual discharge cake
✧ Product Features
- Filtration pressure: 2.0Mpa
B. Discharge filtrate method - Open flow: The filtrate flows out from the bottom of the filter plates.
C. Choice of filter cloth material: PP non-woven cloth.
D. Rack surface treatment: When the slurry is PH value neutral or weak acid base: The surface of the filter press frame is sandblasted first, and then sprayed with primer and anti-corrosion paint. When the PH value of slurry is strong acid or strong alkaline, the surface of the filter press frame is sandblasted, sprayed with primer, and the surface is wrapped with stainless steel or PP plate.
Circular filter press operation: Automatic hydraulic pressing, manual or automatic pull filter plate when discharging cake.
Optional devices of filter press: Drip tray, cake conveyor belt, water sink for receiving filtrate, etc.
E、Circle filter press supporting the choice of feed pump: High-pressure plunger pump, please email for details.
✧ Feeding Process
✧ Application Industries
Solid-liquid separation for stone wastewater, ceramics, kaolin, bentonite, activated soil, building materials and other industries.
✧ Filter Press Ordering Instructions
1. Refer to the filter press selection guide, filter press overview, specifications and models, select the model and supporting equipment according to the needs.
For example: Whether the filter cake is washed or not, whether the effluent is open or close, whether the rack is corrosion-resistant or not, the mode of operation, etc., must be specified in the contract.
2. According to the special needs of customers, our company can design and produce non-standard models or customized products.
3. The product pictures provided in this document are for reference only. In case of changes, we will not give any notice and the actual order will prevail.
Related products
-
Sludge Dewatering Machine Belt Press Filter
✧ Product Features * Higher Filtration rates with minimum moisture content. * Lower operating and maintenance costs due to efficient & sturdy design. * Low friction advanced air box mother belt support system, Variants can be offered with slide rails or roller decks support system. * Controlled belt aligning systems results in maintenance free running for a long time. * Multi stage washing. * Longer life of mother belt due to less friction o...
-
High quality dewatering machine belt filter press
1. Material of the main structure : SUS304/316 2. Belt : Has a long service life 3. Low power consumption, slow-speed of revolution and low noise 4. Adjustment of belt: Pneumatic regulated, ensures the stability of the machine 5. Multi-point safety detection and emergency stop device:improve the operation. 6. The design of the system is obviously humanized and provides convenience in operation and maintenance. printing and dyeing sludge, electroplating sludge, papermaking sludge, chemical ...
-
Small Manual Jack Filter Press
✧ Product Features A、Filtration pressure≤0.6Mpa B、Filtration temperature：45℃/ room temperature; 65℃-100/ high temperature; The raw material ratio of different temperature production filter plates is not the same. C-1、Filtrate discharge method - open flow(seen flow): Filtrate valves (water taps) need to be installed ate the left and right sides of each filter plate, and a matching sink. Observe the filtrate visually and generally is used...
-
Cotton Filter Cloth and Non-woven Fabric
✧ Cotton Filter Cloht Material Cotton 21 yarns, 10 yarns, 16 yarns; high temperature resistant, non-toxic and odorless Use Artificial leather products, sugar factory, rubber, oil extraction, paint, gas, refrigeration, automobile, rain cloth and other industries; Norm 3×4、4×4 、5×5 5×6 、6×6 、7×7、8×8、9×9 、1O×10 、1O×11、11×11、12×12、17×17 ✧ Non-woven Fabric Product introduction Needle-punched non-woven fabric belongs to a kind of non-woven fabric, with...
-
Recessed Filter Plate (CGR Filter Plate)
✧ Product Description The embedded filter plate (sealed filter plate) adopts a embedded structure, the filter cloth is embedded with sealing rubber strips to eliminate leakage caused by capillary phenomenon. The sealing strips are embedded around the filter cloth, which has good sealing performance. The edges of the filter cloth are fully embedded in the sealing groove on the inner side of th...
-
Stainless Steel Filter Plate
✧ Product Features The stainless steel filter plate is made of 304 or 316L all stainless steel, with a long service life, corrosion resistance, good acid and alkaline resistance, and can be used for filtering food grade materials. 1. The stainless steel filter plate is welded to the outer edge of the stainless steel wire mesh as a whole. When the filter plate is backwashed, the wire mesh is firmly welded to the edge. The outer edge of the filter plate will not tear ...