2025 New Version Automatic Hydraulic Filter Press for Chemical Industry
Main Structure and Components
1. Rack Section Including the front plate, rear plate and main beam, they are made of high-strength steel to ensure the stability of the equipment.
2. Filter plate and filter cloth The filter plate can be made of polypropylene (PP), rubber or stainless steel, which has strong corrosion resistance; the filter cloth is selected according to the characteristics of the materials (such as polyester, nylon).
3. Hydraulic System Provide high-pressure power, automatically compress the filter plate (the pressure can usually reach 25-30 MPa), with excellent sealing performance.
4. Automatic Plate Pulling Device Through motor or hydraulic drive, the filter plates are precisely controlled to be pulled apart one by one, enabling rapid discharging.
5. Control System PLC programming control, supporting touchscreen operation, allowing setting of parameters such as pressure, time, and cycle count.
Core Advantages
1. High-efficiency Automation: No manual intervention throughout the process. The processing capacity is 30% – 50% higher than that of traditional filter presses.
2. Energy conservation and environmental protection: The moisture content of the filter cake is low (in some industries, it can be reduced to below 15%), thereby reducing the cost of subsequent drying; the filtrate is clear and can be reused.
3. High durability: Key components are designed with anti-corrosion features, ensuring long service life and easy maintenance.
4. Flexible Adaptation: Supports various designs such as direct flow, indirect flow, washable, and non-washable, meeting different process requirements.
Application Fields
Chemical Industry: Pigments, dyes, catalyst recovery.
Mining: Tailings dewatering, extraction of metal concentrates.
Environmental protection: Municipal sludge and industrial wastewater treatment.
Food: Juice clarified, starch dehydrated.
Related products
-
Small Manual Jack Filter Press
✧ Product Features A、Filtration pressure≤0.6Mpa B、Filtration temperature：45℃/ room temperature; 65℃-100/ high temperature; The raw material ratio of different temperature production filter plates is not the same. C-1、Filtrate discharge method - open flow(seen flow): Filtrate valves (water taps) need to be installed ate the left and right sides of each filter plate, and a matching sink. Observe the filtrate visually and generally is used...
-
Chamber-type automatic hydraulic compression au...
Product Overview: The chamber filter press is an intermittent solid-liquid separation equipment that operates on the principles of high-pressure extrusion and filter cloth filtration. It is suitable for the dehydration treatment of high-viscosity and fine particle materials and is widely used in industries such as chemical engineering, metallurgy, food, and environmental protection. Core features: High-pressure dewatering – Utilizing a hydraulic or mechanical pressing system to provide ...
-
EPDM Sealed Filter Press 380×380 PP Plates...
Product Features Fully sealed filtration system: The filter plates are sealed together using EPDM. The entire process of feeding and liquid discharge is enclosed, with no open sections, effectively controlling the escape of odors and the splashing of the material liquid. Manual jack compression: No need for electricity or hydraulic station. The mechanical jack provides stable and uniform compression force. The operation is intuitive and maintenance is minimal. Composite corrosion-resistant...
-
Automatic Chamber Filter Press Carbon Steel Fra...
Product Features Dual concealed filtrate discharge system – Adopts a closed dual-hidden-flow structure, allowing filtrate to flow out through concealed channels on both sides. This effectively prevents splashing, protects the operating environment, and facilitates centralized filtrate collection and piping layout. Center feed inlet – Material is injected directly into the filter chamber through the center hole of the filter plate, ensuring even distribution, rapid cake formation, and red...
-
Industrial filtration equipment High Efficiency...
Product features and advantages 1. Low cost: The purchase cost and maintenance cost of the equipment are both low. 2. Simple operation: No need for complex electrical or hydraulic knowledge. Training is sufficient for immediate on-the-job use. 3. Safe and reliable: There is no risk of hydraulic oil leakage. Manual operation is safer in certain situations. 4. Easy maintenance: The structure is simple, with few failure points, and the daily maintenance workload is small. 5. Visual Observation...
-
Strong corrosion slurry filtration filter press
✧ Customization We can customize filter presses according to users' requirements, such as the rack can be wrapped with stainless steel, PP plate, Spraying plastics, for special industries with strong corrosion or food grade, or special demands for special filter liquor such as volatile, toxic, irritating smell or corrosive, etc. Welcome to send us your detailed requirements. We can also equip with feeding pump, belt conveyor, liquid receiving fl...