Strong corrosion slurry filtration filter press

A-1. Filtration pressure: 0.6Mpa；1.0Mpa；1.3Mpa；1.6Mpa. (Optional)

A-2. Diaphragm squeezing cake pressure: 1.0Mpa；1.3Mpa；1.6Mpa. (Optional)

B、Filtration temperature：45℃/ room temperature; 65-100℃/ high temperature.(Optional)

C-1. Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate, and a matching sink. Open flow is used for liquids that are not recovered.

C-2. Liquid discharge method -close flow：Under the feed end of the filter press, there are two close flow outlet main pipes, which are connected with the liquid recovery tank. If the liquid needs to be recovered, or if the liquid is volatile, smelly, flammable and explosive, dark flow is used.

D-1. Selection of filter cloth material: The PH of the liquid determines the material of the filter cloth. PH1-5 is acidic polyester filter cloth, PH8-14 is alkaline polypropylene filter cloth. The viscous liquid or solid is preferred to choose twill filter cloth, and the non-viscous liquid or solid is selected plain filter cloth.

D-2. Selection of filter cloth mesh: The fluid is separated, and the corresponding mesh number is selected for different solid particle sizes. Filter cloth mesh range 100-1000 mesh. Micron to mesh conversion (1UM = 15,000 mesh---in theory).

E. Rack surface treatment: When the PH value neutral or weak acid base: The surface of the filter press frame is sandblasted first, and then sprayed with primer and anti-corrosion paint. When the PH value is strong acid or strong alkaline, the surface of the filter press frame is sandblasted, sprayed with primer, and the surface is wrapped with stainless steel or PP plate.

F. Diaphragm filter press operation (for choice): Automatic Hydraulic Pressing; Filter cake washing, Automatic Filter Plate Pulling; Filter Plate Vibrating Cake Discharge; Automatic Filter Cloth Rinsing System. Please kindly tell me the functions you need before ordering.

G. Filter cake washing (for choice): When solids need to be recovered, the filter cake is strongly acidic or alkaline; When the filter cake needs to be washed with water, please send an email to inquire about the washing method.

H. Filter press feeding pump (for choice): The solid-liquid ratio, acidity, temperature and characteristics of the liquid are different, so different feed pumps are required. Please send email to inquire.

I. Automatic belt conveyor (for choice): The belt conveyor is installed under the plate of filter press, which is used for transporting the discharged cake after the filter plates have been pulled open. This device is suitable for the project which is not convenient to make the base floor. It can delivery the cake to the designated place, which will reduce much labor work.

J. Automatic dripping tray (for choice): The drip tray is installed under the plate of filter press. During the filtration process, the two plate trays are in a closed state, which can lead the dripping liquid during the filtration and the cloth washing water to the water collector sideways. After the filtration, the two plate trays will be opened to discharge the cake.

K. The filter press cloth water flushing system (for choice): It is installed above the main beam of the filter press, and it is equipped with automatic travelling function, and the filter cloth is automatically rinsed with high pressure water (36.0Mpa) by switching the valve. There are two kinds of structures for rinsing: single-side rinsing and double-side rinsing, in which the double-side rinsing has brushes for good cleaning effect. With the flap mechanism, the rinsing water can be recycled and reused after treatment to save resources; combined with diaphragm press system, it can get lower water content; assembled frame, compact structure, easy to disassemble and transport.