Factory direct supply Low Maintenance 870 Industrial Automatic Filter Press
Main Structure and Components
1. Rack Section
Including the front plate, rear plate and main beam, they are made of high-strength steel to ensure the stability of the equipment.
2. Filter plate and filter cloth
The filter plate can be made of polypropylene (PP), rubber or stainless steel, which has strong corrosion resistance; the filter cloth is selected according to the characteristics of the materials (such as polyester, nylon).
3. Hydraulic System
Provide high-pressure power, automatically compress the filter plate (the pressure can usually reach 25-30 MPa), with excellent sealing performance.
4. Automatic Plate Pulling Device
Through motor or hydraulic drive, the filter plates are precisely controlled to be pulled apart one by one, enabling rapid discharging.
5. Control System
PLC programming control, supporting touchscreen operation, allowing setting of parameters such as pressure, time, and cycle count.
Core Advantages
1. High-efficiency Automation:
No manual intervention throughout the process. The processing capacity is 30% – 50% higher than that of traditional filter presses.
2. Energy conservation and environmental protection:
The moisture content of the filter cake is low (in some industries, it can be reduced to below 15%), thereby reducing the cost of subsequent drying; the filtrate is clear and can be reused.
3. High durability:
Key components are designed with anti-corrosion features, ensuring long service life and easy maintenance.
4. Flexible Adaptation:
Supports various designs such as direct flow, indirect flow, washable, and non-washable, meeting different process requirements.
Equipment schematic diagram
Programmed automatic pulling plate chamber filter presses is not manual operation, but a key start or remote control and achieve full automation. Junyi’s chamber filter presses are equipped with an intelligent control system with an LCD display of the operating process and a fault warning function. At the same time, the equipment adopts Siemens PLC automatic control and Schneider components to ensure the overall operation of the equipment. In addition, the equipment is equipped with safety devices to ensure safe operation.
Application fields
Chemical Industry:
Pigments, dyes, catalyst recovery.
Mining:
Tailings dewatering, extraction of metal concentrates.
Environmental protection:
Municipal sludge and industrial wastewater treatment.
Food:
Juice clarified, starch dehydrated.
Related products
-
Automatic pull plate double oil cylinder large ...
Automatic hydraulic filter press is a batch of pressure filtration equipment, mainly used for solid-liquid separation of various suspensions. It has the advantages of good separation effect and convenient use, and is widely used in petroleum, chemical industry, dyestuff, metallurgy, pharmacy, food, paper making, coal washing and sewage treatment . Automatic hydraulic filter press is mainly composed of the following parts: rack part : includes a thrust plate and a compression plate to...
-
Factory price Environmental Sludge Dewatering 6...
Key Features 1. High-strength box-type structure design, with excellent pressure resistance performance 2. Fully automatic PLC control system, enabling one-click operation 3.Modular design, with simple and efficient maintenance. 4.Multiple safety protection devices ensure reliable operation 5.Low energy consumption design, with economical operating costs 6.Selection of corrosion-resistant materials, suitable for harsh working conditions Core advantages 1. High-efficiency filtration perform...
-
New products Fully Automatic Hydraulic Filter P...
Main structural components 1. Frame section High-strength steel structure frame, ensuring the stability and pressure-bearing capacity of the equipment. The hydraulic cylinder drives the filter plate group to be pressed and released. 2. Filter plate and filter cloth Filter plate material: reinforced polypropylene (PP), rubber, stainless steel, etc. Resistant to corrosion and high temperature. Secondary opening design: The filter plates are alternately opened in two groups to prevent the fil...
-
Chamber-type automatic hydraulic compression au...
Product Overview: The chamber filter press is an intermittent solid-liquid separation equipment that operates on the principles of high-pressure extrusion and filter cloth filtration. It is suitable for the dehydration treatment of high-viscosity and fine particle materials and is widely used in industries such as chemical engineering, metallurgy, food, and environmental protection. Core features: High-pressure dewatering – Utilizing a hydraulic or mechanical pressing system to provide ...
-
Automatic recessed Filter Press anti leakage fi...
✧ Product Description It is a new type of the filter press with the recessed filter plate and strengthen rack. There are two kinds of such filter press: PP Plate Recessed Filter Press and Membrane Plate Recessed Filter Press. After the filter plate has been pressed,there will be a closed state among the chambers to avoid the liquid leakage and odors volatilization during the filtration and cake discharging. It is widely used in the pesticide, chemical, the s...
-
2025 New Version Automatic Hydraulic Filter Pre...
Main Structure and Components 1. Rack Section Including the front plate, rear plate and main beam, they are made of high-strength steel to ensure the stability of the equipment. 2. Filter plate and filter cloth The filter plate can be made of polypropylene (PP), rubber or stainless steel, which has strong corrosion resistance; the filter cloth is selected according to the characteristics of the materials (such as polyester, nylon). 3. Hydraulic System Provide high-pressure power, automatica...